Transformer
Input leads are 20 AWG. Output leads are 14 AWG. Lead insulation is 105 °C.
The transformer uses a class B 130 °C insulation system.
Enclosure
Enclosure temperature will not exceed 70 °C @ 40 °C ambient.
Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by a screw.
The enclosure is black powder coated.
General
• Manual reset thermal circuit breaker on the secondary side.
• Controlled with a low-voltage dimmer.
• ETL listed

Maximum Load 60 W
Input Voltage 120 V 60 Hz
Output Voltage Full Load 11.5 V
Input Current Full Load 540 mA
Open Circuit Volts 12.5 V
Output Current Full Load 4.8 A
Efficiency 89.20%
Coil Former Double Section Bobbin
Thermal Class B 130 °C
Leads Primary PVC 600 V #20
Leads Secondary PVC 300 V #14
• CSA listed
• UL standard 5085-1
• NEMA 3R enclosure